欢迎您 - 游客
  • english site

航班 报告

查看 报告

航班号: CCA4112B

    飞行员: Yang Cenyi
  • 起飞机场: 成都双流国际机场 (ZUUU)
  • 到达机场: 拉萨贡嘎国际机场 (ZULS)
  • 机型: A319-100 (B-6235)
  • 飞行时间: 02.24
  • 报告提交时间: 02/21/2020
  • 航路: CZH B213 PARGU W12 IBVUL W9 DM
  • 状态: 被驳回
航班细节
总收入:
(127 名乘客 / $ 1, 322.14 每位乘客
$ 167, 911.78
燃油消耗:
(12480 磅燃油 @ 0.8 / 每磅)
$ 9, 984.00

详细日志信息:

smartCARS version 2.1.34.0, 2020/2/21 UTC
[13:08:07] Preflight started, flying on VATSIM
[13:08:07] Flying FSLabs A319X IAE - Air China (B-6235)
[14:25:14] Engine 2 is on
[14:25:27] Pushing back with 29502 lb of fuel
[14:27:51] Engine 1 is on
[14:30:47] Taxiing to runway
[14:31:49] Flaps set to position 1
[14:31:57] Flaps set to position 6
[14:43:10] Taking off
[14:43:36] Climbing, pitch: 11, roll: level, 161 kts
[14:43:44] Gear lever raised at 141 ft at 176 kts
[14:44:14] Flaps set to position 0 at 1197 ft at 209 kts
[15:01:54] Cruising at 34100ft, pitch: 2, 361 kts
[16:24:14] Descending
[16:34:50] Flaps set to position 1 at 8426 ft at 212 kts
[16:35:45] Flaps set to position 2 at 7935 ft at 183 kts
[16:35:51] Flaps set to position 7 at 7927 ft at 180 kts
[16:35:52] Gear lever lowered at 7926 ft at 179 kts
[16:36:08] Approaching
[16:36:30] Flaps set to position 8 at 7468 ft at 143 kts
[16:36:37] Flaps set to position 9 at 7417 ft at 136 kts
[16:38:25] Go around conditions met
[16:38:34] Standard approach conditions met
[16:43:34] Final approach, 159 kts
[16:46:50] Touched down at -246 fpm, gear lever: down, pitch: 6, roll: 1 degrees right, 151 kts
[16:47:46] Landed in 9501 ft, fuel: 17098 lb, weight: 133275 lb
[16:47:46] Taxiing to gate
[16:51:17] The flight may now be ended
[16:51:17] Arrived, flight duration: 02:24
[16:52:54] Engine 1 is off
[16:53:00] Engine 2 is off
[16:54:21] Flaps set to position 8
[16:54:23] Flaps set to position 9
[16:55:02] Flaps set to position 8
[16:56:50] Flaps set to position 7
[16:56:52] Flaps set to position 8
[16:58:38] Flaps set to position 7
[16:58:42] Flaps set to position 6
[16:58:47] Flaps set to position 2
[16:59:02] Engine 2 is on
[16:59:41] Flaps set to position 1
[16:59:45] Flaps set to position 0
[17:00:13] Engine 2 is off

Comments

Commenter Comment
Xu Chen Could explain why your engine no 2 shutdown than start again? for what reason?
Xu Chen Please explain confusing action :engine 2 shutdown start again and why flaps doesn't up before engine shutdown
Yang Cenyi because I turn off the engine before the flaps fully retracted, so I need to turn on the ENGINE 2 to pressure the hydraulic system in order to retracr flaps

Route Map